R: Call 'EPANET' Functions to Simulate Pipe Networks

# Call 'EPANET' Functions to Simulate Pipe Networks

## Documentation for package ‘epanet2toolkit’ version 1.0.9

- DESCRIPTION file
- Package README

## Help Pages

E

## -- E --

ENaddcontrol | Add a new simple control
ENaddcurve | Adds a new data curve to a project.
ENadddemand | Appends a new demand to a junction node demands list.
ENaddlink | Add a link to the network
ENaddnode | Adds a new node
ENaddpattern | Add a new time pattern
ENaddrule | Adds a new rule-based control to a project
ENclearreport | Clears the contents of a project's report file.
ENclose | Close down the EPANET Toolkit system.
ENcloseH | close hydraulics engine
ENcloseQ | Close water quality analysis and free allocated memory
ENcopyreport | Copies the current contents of a project's report file to another file
ENdeletecontrol | Deletes an existing simple control
ENdeletecurve | Deletes a data curve from a project
ENdeletedemand | Delete a demand from a junction node
ENdeletelink | Delete a link from the project.
ENdeletenode | Deletes a node
ENdeletepattern | Delete a new time pattern
ENdeleterule | Deletes an existing rule-based control
ENepanet | ENepanet
ENgetaveragepatternvalue | Get average of all time factors in a pattern
ENgetbasedemand | Gets the base demand for one of a node's demand categories.
ENgetcontrol | ENgetcontrol
ENgetcoord | Get coordinates for a node
ENgetcount | Get number of network elements.
ENgetcurveid | Retrieves the ID name of a curve given its index.
ENgetcurveindex | Retrieves the index of a curve given its ID name.
ENgetcurvelen | Retrieves the number of points in a curve.
ENgetcurvetype | Retrieves a curve's type
ENgetcurvevalue | Retrieves the value of a single data point for a curve.
ENgetdemandindex | Retrieves the index of a node's named demand category
ENgetdemandmodel | Get type of demand model in use and its parameters
ENgetdemandname | Retrieves the name of a node's demand category.
ENgetdemandpattern | Gets the base demand for one of a node's demand categories.
ENgetelseaction | Gets the properties of an ELSE action in a rule-based control.
ENgeterror | Returns the text of an error message generated by an error code
ENgetflowunits | Retrieve a code number indicating the units used to express all flow rates.
ENgetheadcurveindex | Retrieves index of head curve used by a pump
ENgetlinkid | Retrieve the ID label of a link
ENgetlinkindex | Retrieve the index of a link
ENgetlinknodes | Retrieve the index of the end nodes of a link
ENgetlinktype | Retrieve the type code for a link
ENgetlinkvalue | Retrieve parameter value for a link
ENgetnodeid | Retrieve the ID label a node.
ENgetnodeindex | Retrieve the index of a node
ENgetnodetype | Retrieve the node-type code
ENgetnodevalue | Retrieve node parameter value.
ENgetnumdemands | Get number of demands for a junction node
ENgetoption | Retrieve the value of an analysis option.
ENgetpatternid | Retrieve the ID label a time pattern
ENgetpatternindex | Retrieve the index a time pattern.
ENgetpatternlen | Retrieve the number of time periods in a time pattern.
ENgetpatternvalue | Retrieve the multiplier factor for a specific time period
ENgetpremise | Gets the properties of a premise in a rule-based control.
ENgetpumptype | Retrieves type of head curve used by a pump
ENgetqualinfo | Get quality analysis information
ENgetqualtype | Retrieve the type of water quality analysis called for.
ENgetresultindex | Retrieves the order in which a node or link appears in an output file.
ENgetrule | Retrieves summary information about a rule-based control.
ENgetruleID | Gets the ID name of a rule-based control given its index.
ENgetstatistic | Analysis convergence statistics.
ENgetthenaction | Gets properties of THEN action in rule-based control
ENgettimeparam | Get the value of one or more specific analysis time parameters.
ENgettitle | ENgettitle
ENgetversion | Retrieve the current version number of the EPANET Toolkit.
ENgetvertex | Get vertex coordinates
ENgetvertexcount | Get number of vertices for a link
ENinit | ENinit
ENinitH | Initialize hydraulic engine
ENinitQ | Initialize water quality analysis
ENnextH | determine the next hydraulic step
ENnextQ | Advances WQ simulation to start of the next hydraulic time period.
ENopen | Open the EPANET Toolkit.
ENopenH | Open hydraulics analysis system.
ENopenQ | Sets up for Water Quality analysis
ENreport | Write simulation report to the report file
ENresetreport | Resets a project's report options to their default values.
ENrunH | run hydraulics engine
ENrunQ | Computs WQ results at current time .
ENsaveH | ENsaveH Saves hydraulic results to binary file
ENsavehydfile | Saves temporary hydraulics file to disk
ENsaveinpfile | ENaveinpfile Saves current data to "INP" formatted text file.
ENsetbasedemand | Sets the base demand for one of a node's demand categories.
ENsetcontrol | Set the parameters of a simple control statement
ENsetcoord | Set coordinates for a node
ENsetcurveid | Changes the ID name of a data curve given its index.
ENsetcurvevalue | Sets the value of a single data point for a curve.
ENsetdemandmodel | Sets the type of demand model to use and its parameters.
ENsetdemandname | Sets the name of a node's demand category.
ENsetdemandpattern | Sets the index of a time pattern used for one of a node's demand categories.
ENsetelseaction | Set properties of an ELSE action in a rule-based control
ENsetflowunits | Sets flow units.
ENsetheadcurveindex | Sets index of head curve used by a pump
ENsetjuncdata | Sets properties for a junction
ENsetlinkid | Change the ID of a link
ENsetlinknodes | Set the indexes of a link's start- and end-nodes
ENsetlinktype | Change a link's type
ENsetlinkvalue | Set a parameter value for a link
ENsetnodeid | Changes the ID name of a node
ENsetnodevalue | Set the parameter value for a node.
ENsetoption | Set the value of a particular analysis option.
ENsetpattern | Set all of the multiplier factors for a specific time pattern.
ENsetpatternid | Change the ID name of a time pattern given its index.
ENsetpatternvalue | set pattern value
ENsetpremise | Sets the properties of a premise in a rule-based control.
ENsetpremiseindex | Sets the index of an object in a premise of a rule-based control
ENsetpremisestatus | Sets the status being compared to in a premise of a rule-based control
ENsetpremisevalue | Sets the value in a premise of a rule-based control
ENsetqualtype | Set the type of water quality analysis called for.
ENsetreport | Processes a reporting format command.
ENsetrulepriority | Sets the priority of a rule-based control.
ENsetstatusreport | Sets the level of hydraulic status reporting.
ENsettankdata | Sets properties for a tank
ENsetthenaction | Set properties of THEN action in a rule-based control
ENsettimeparam | Set the value of a time parameter.
ENsetvertices | Set a link's vertices
ENsolveH | ENsolveH
ENsolveQ | Solve network water quality for all time periods
ENstepQ | Advances WQ simulation one water quality time step.
ENusehydfile | Uses previously saved binary hydraulics file to supply a project's hydraulics.